Organ (music) facts for kids
In music, an organ is a keyboard instrument which makes sound by forcing air through pipes. They are common instruments in churches, and sometimes appear in theatres, especially older movie theatres or cinemas. A person who plays the organ is called an organist.
Types of organs:
- Pipe organ - the oldest type, sometimes powered by foot pedals
- Water organ - similar to a pipe organ, but powered by water flow
- Mechanical organ - powered by a crank; may include a street organ or barrel organ (these types are sometimes called hurdy gurdies, but this is not accurate), or fairground organ
- Electric organ - a later type, which uses an electric motor to move air
- Electronic organ - the newest type, which uses electronics to simulate the sound of a pipe or electric organ
Contents
Pipe organs
The pipe organ is the grandest musical instrument in size and scope, and has existed in its current form since the 14th century (though other designs, such as the hydraulic organ, were already used in Antiquity). Along with the clock, it was considered one of the most complex human-made creations before the Industrial Revolution. Pipe organs range in size from a single short keyboard to huge instruments with over 10,000 pipes. A large modern organ typically has three or four keyboards (manuals) with five octaves (61 notes) each, and a two-and-a-half octave (32-note) pedalboard.
Wolfgang Amadeus Mozart called the organ the "King of instruments". Some of the biggest instruments have 64-foot pipes (a foot here means "sonic-foot", a measure quite close to the English measurement unit), and it sounds to an 8 Hz frequency fundamental tone. Perhaps the most distinctive feature is the ability to range from the slightest sound to the most powerful, plein-jeu impressive sonic discharge, which can be sustained in time indefinitely by the organist. For instance, the Wanamaker organ, located in Philadelphia, USA, has sonic resources comparable with three simultaneous symphonic orchestras. Another interesting feature lies in its intrinsic "polyphony" approach: each set of pipes can be played simultaneously with others, and the sounds mixed and intersperse in the environment, not in the instrument itself. (Contrast this with digital organs, where the electronically-produced sound comes from loudspeakers.)
Church organs
The principal purpose of most organs in North America, South America, Europe, Australia and New Zealand is to play in Christian and Reform Jewish religious services. An organ used for this purpose is generally called a church organ. The introduction of church organs is traditionally attributed to Pope Vitalian in the 7th century. Due to its ability to simultaneously provide a musical foundation below the vocal register, support in the vocal register, and increased brightness above the vocal register, the organ is ideally suited to accompany human voices, whether a congregation, a choir or a cantor or soloist. Most services also include solo organ repertoire for independent performance rather than by way of accompaniment, often as a prelude at the beginning the service and a postlude at the conclusion of the service.
Chamber organs
A chamber organ is a small pipe organ, often with only one manual, and sometimes without separate pedal pipes that is placed in a small room, that this diminutive organ can fill with sound. It is often confined to chamber organ repertoire, as often the organs have too little voice capabilities to rival the grand pipe organs in the performance of the classics. The sound and touch are unique to the instrument, sounding nothing like a large organ with few stops drawn out, but rather much more intimate. They are usually tracker instruments, although the modern builders are often building electropneumatic chamber organs.
Theatre organs
The theatre organ or cinema organ was designed to accompany silent movies. Like a symphonic organ, it is made to replace an orchestra. However, it includes many more gadgets, such as percussion and special effects, to provide a more complete array of options to the theatre organist. Theatre organs tend not to take nearly as much space as standard organs, relying on extension and higher wind pressures to produce a greater variety of tone and larger volume of sound from fewer pipes.
This extension is called "unification", meaning that instead of one pipe for each key at all pitches, the higher octaves of pitch (and in some cases, lower octaves) are achieved by merely adding 12 pipes (one octave) to the top and/or bottom of a given division. Assuming there are sixty-one keys on an organ manual (a common number in concert organs and in North America), a classical organ will have, for diapason stops at 8', 4' and 2' pitch, a total of 183 pipes (61 plus 61 plus 61). The same chorus of diapasons on a theatre organ will have only 85 pipes (61 plus 12 plus 12). Some ranks, such as the Tibia Clausa, with up to 97 pipes, allow the organist to draw stops at 16', 8', 4', 2', and mutations from a single rank of pipes.
Other pipe organs
The bamboo organ called Bambuso sonoro is an experimental custom-made instrument designed by Hans van Koolwijk. The instrument has 100 flutes made of bamboo.
Reed organs
The reed organ and harmonium was the other main type of organ before the development of electronic organs. It generated its sounds using reeds similar to those of a piano accordion. Smaller, cheaper and more portable than the corresponding pipe instrument, these were widely used in smaller churches and in private homes, but their volume and tonal range was extremely limited, and they were generally limited to one or two manuals, pedalboards being extremely rare.
Chord organs
The chord organ was invented by Laurens Hammond in 1950. It provided chord buttons for the left hand, similar to an accordion. Other reed organ manufacturers have also produced chord organs.
Electronic organs
Since the 1930s, pipeless electric instruments have been available to produce similar sounds and perform similar roles to pipe organs. Many of these have been bought both by houses of worship and other potential pipe organ customers, and also by many musicians both professional and amateur for whom a pipe organ would not be a possibility. Far smaller and cheaper to buy than a corresponding pipe instrument, and in many cases portable, they have taken organ music into private homes and into dance bands and other new environments, and have almost completely replaced the reed organ.
Hammond organs
The Hammond organ was the first successful electric organ, released in the 1930s. It used mechanical, rotating tonewheels to produce the sound waveforms. Its system of drawbars allowed for setting volumes for specific sounds, and it provided vibrato-like effects. The drawbars allow the player to choose volume levels of 0-8 for each of the members of the harmonic series starting from 16'. The three most popular models of Hammond organs were the consoles: the B-3, C-3, and A-100. Inside all three models, the tone generators, drawbars, and keyboards were identical. The B-3 cabinet stood on 4 legs, the C-3 was an enclosed "church" model, and the A100 series had built in amplifiers and speakers.
Though originally produced to replace organs in the church, the Hammond organ, especially the model B-3, became popular in jazz, particularly soul jazz, and in gospel music. Since these were the roots of rock and roll, the Hammond organ became a part of the rock and roll sound. It was widely used in rock and popular music during the 1960s and 1970s by bands like The Doors, Pink Floyd, Procol Harum, Santana and Deep Purple. Its popularity resurged in pop music around 2000, in part due to the availability of clonewheel organs that were light enough for one person to carry.
Other electronic organs
Frequency divider organs used oscillators instead of mechanical parts to make sound. These were even cheaper and more portable than the Hammond. They featured an ability to bend pitches.
In the 1940s until the 1970s, small organs were sold that simplified traditional organ stops. These instruments can be considered the predecessor to modern portable keyboards, as they included one-touch chords, rhythm and accompaniment devices, and other electronically assisted gadgets. Lowrey was the leading manufacturer of this type of organs in the smaller (spinet) instruments.
In the '60s and '70s, a type of simple, portable electronic organ called the combo organ was popular, especially with pop and rock bands, and was a signature sound in the pop music of the period, such as The Doors, Led Zeppelin, and Iron Butterfly. The most popular combo organs were manufactured by Farfisa and Vox.
Digital organs
The development of the integrated circuit enabled another revolution in electronic keyboard instruments. Digital organs sold since the 1970s utilize additive synthesis, then sampling technology (1980s) and physical modelling synthesis (1990s) are also utilized to produce the sound.
Virtual Pipe Organs, played via MIDI, access samples of real pipe organs stored on a computer, as opposed to digital organs that use DSP and processor hardware inside a console to produce sounds or deliver sound samples.
With Stereo or mulitple channel audio systems, virual organs can approach the acoustic realism of a real pipe organ. For example, for most Virtual Organs with a pedal division containing 16 ft or 32 ft pipes, a subwoofer arrangement is required to reproduce the powerful movement of air at frequencies around 32 Hz or lower. For personal purpose, typically small studio quality near-field monitors with subwoofer are used.
Steam organ
The wind can also be created by using pressurized steam instead of air. The steam organ, or calliope, was invented in the United States in 19th century. Calliopes usually have very loud and clean sound. Calliopes are used as outdoors instruments, and many have been built on wheeled platforms.
Historical instruments
Various instruments
Reed organs
- Harmonium or parlor organ, a reed instrument usually with many stops and two foot-operated bellows
- American reed organ is a foot bellow or electric reed keyboard similar to the Harmonium, but that works on negative pressure—it sucks air through the reeds
- Melodeon, a reed instrument with an air reservoir and a foot operated bellows—popular in the USA in the mid-19th century
Squeezeboxes
- Squeezeboxes such as the accordion, concertina, Bandoneón, etc., free reed instruments in which the bellows is operated by the squeezing action of the instrumentalist;
Mechanical organs
- Barrel organ—made famous by organ grinders in its portable form, the larger form often equipped with keyboards for human performance
- Novelty instruments or various types that operate on the same principles
- Orchestrion, fairground organ (or band organ in the USA), dutch street organ and Dance organ—these pipe organs use a piano roll player or other mechanical means instead of a keyboard to play a prepared song.
-
Orchestrion from Germany
-
Band organ from USA
Images for kids
-
Depiction of an organ in the Utrecht Psalter
-
A harmonium. Operation of the two large pedals at the bottom of the case supplies wind to the reeds.
-
A modern digital organ (Nord Electro 2) utilizing modeling and DSP technology
-
Organ in St Giles' Cathedral
See also
In Spanish: Órgano (instrumento musical) para niños